Installing The Light Plate; Installing The Light Kit And Glass Shade - Kichler 56 Crescent Manual De Instrucciones

INSTALLING THE LIGHT PLATE

Mounting Plate
Step 2. Place the two slot holes on the light plate over the 2 screws previously
loosened from the mounting plate. Rotate the light plate until it locks in
place at the narrow end of the key holes. Secure by tightening the 2 screws
previously loosened and the one previously removed. (Fig. 21)
Light Plate

INSTALLING THE LIGHT KIT AND GLASS SHADE

Fig. 21
CAUTION: To Reduce The Risk Of Electric Shock, Disconnect The Electrical
Supply Circuit To The Fan Before Installing Light Kit.
Step 1. Hold the LED light kit to light plate, then connect the 2 single pin
connectors from the light kit to the 2 single pin connectors from the motor
assembly. Connect the black wire to black wire, and the white wire to white
wire. Attach the light kit to the light plate and securely tighten with three (3)
screws from the screw pack (Fig. 22)
Fig. 22
14 | KICHLER.COM