Technical Maintenance; Intended Use - Sabo CS-25 Manual Del Operador

Avoid contact with the bar nose.
DANGER! Caution: kickbacks.
The symbol shows the direction of movement of the saw chain.
The symbol indicates the rotation direction for tightening and releasing the chain tension.
The symbol shows the oil tank for the saw chain lubricant.
·
·
The following signal words and meanings indicate the
degree of risk associated with this product.
SYMBOL

TECHNICAL MAINTENANCE

The maintenance requires the highest levels of caution and knowledge and therefore should only be performed by an expert. We recommend that you take the device to a nearby approved
dealer. When maintaining the device, only identical and original spare parts should be used.
WARNING
Use of a power tool can lead to other objects hitting you in the eyes and cause serious eye injuries. Before working with power tools, always wear safety goggles with side protection and,
if applicable, with face protection. We recommend vision safety mask, which can be used with normal glasses or standard safety goggles with side protection. Always wear eye protection
that corresponds to standard EN 166.
5

INTENDED USE

·
The device may only be used for the following purposes:
This product is designed for cutting branches, stumps and beams of a diameter determined by the cutting length of the guide bar.
o
It is designed exclusively for cutting wood.
o
It is strictly for use by adults in an outdoor setting and for domestic uses.
o
Any use going beyond this is not considered proper use; the manufacturer is not liable for any damage resulting from such use, the risk is borne by the user alone. Proper use also
includes adherence to the operation, maintenance and service conditions prescribed by the manufacturer.
·
Special care is required during use in public areas, parks, sports facilities, on roads and in agricultural and forestry operations. Local laws and provisions are to be strictly followed.
·
Do not use this product for any purpose other than those named above.
·
Use of this product for professional tree care is prohibited. It is not to be used by children or by persons who are not wearing appropriate personal protective equipment and clothing.
· Please note that this device is not designed for commercial, trade or industrial use. We accept no warranty claims for devices that are used in commercial, trade or industrial operations
or similar activities.
· The use of any additional equipment and attachments not approved by the manufacturer is prohibited. If such additional equipment and attachments are used, the CE conformity and
guarantee shall be null and void. Unauthorised modifications to this product exclude the manufacturer from liability for any damage resulting from these modifications.
· There is a residual risk despite the intended use and particular care of the user. Use the device with care at all times. Possible hazards by device type and model:
Contact with exposed saw teeth of the saw chain (cutting hazard).
o
Access to the rotating saw chain (cutting hazard).
o
Unforeseen, abrupt movement of the guide bar (cutting hazard).
o
Up symbol: The chain brake is released in this direction
Down symbol: The chain brake is engaged in this direction.
SIGNAL
DANGER:
WARNING:
ATTENTION!
ATTENTION!
NOTE
MEANING
Describes an immediate dangerous situation that, if it is not prevented, can lead to death or serious injuries.
Describes a possible dangerous situation that, if it is not prevented, can lead to death or serious injuries.
Describes a possible dangerous situation that, if it is not prevented, can lead to minor and moderate injuries.
(without safety symbol) Describes a situation which can lead to material damage.
Describes information that will help you better understand the operation of the device.