Important; Agitator Assembly - Titan T8000 Guia Del Usuario

16. Remove the wood agitator and the worn belt.
17. Check and clean the wood agitator and the belt. See AGITATOR ASSEMBLY (page 38)
for picture of complete agitator assembly.
TO CLEAN AGITATOR
NOTE:
cleaner, the agitator must be cleaned every time the belt is changed.
The agitator must also be cleaned according to the following schedule:
Vacuum Cleaner Use
HEAVY - (used daily)
MODERATE - (used 2-3 times/week)
LIGHT - (used 1 time/week)

IMPORTANT

Turn off and unplug the vacuum cleaner
from the electrical outlet. Check and remove
hair, string and lint build-up frequently in the
motorized nozzle agitator and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris located
on the agitator or end caps.
Belt
Clean Agitator
every week
every month
every 2 months
End Cap

AGITATOR ASSEMBLY

Belt Path
-38-
Wood Agitator
Brush Unit End Cap