Mounting The Multitool - Stihl KB-MM Manual De Instrucciones

English

Mounting the MultiTool

Removing Existing MultiTools
WARNING
Wear gloves to reduce the risk of injury
from contact with sharp MultiTools
and/or hot surface of gearbox.
Remove the hitch pins and pull the
N
MultiTools (if fitted) off the axle –
see also "Mounting the MultiTool" in
the instruction manual of the other
MultiTool.
Clean the gearbox if necessary.
N
12
Checking Deflector
WARNING
To reduce the risk of injury from thrown
objects, operate the KB-MM bristle
brush only with the deflector shown and
with properly mounted deflector
extensions.
Changing the Deflector
Removing the Gearbox
1
2
1
Loosen the clamp screws (1) and
N
pull the gearbox (2) off the drive
tube.
Removing the Deflector
3
4
Loosen the screw (3) and pull the
N
deflector (4) off the drive tube.
KB-MM, KW-MM