Danger From Welding Fumes - Fronius MTG 250d Manual De Instrucciones

Ocultar thumbs Ver también para MTG 250d:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71
Risk of damage due to operation without coolant.
This can result in serious damage to property.
Danger from coolant leakage.
This can result in serious injury and damage to property.
Danger from
welding fumes
Danger from the fumes produced during welding, which contain harmful gases
and vapours.
These can cause severe damage to health.
CAUTION!
Never operate a water-cooled welding torch without coolant.
Fronius shall not be liable for any damage resulting from such action. In ad-
dition, no warranty claims will be entertained.
CAUTION!
Seal the coolant hoses on water-cooled welding torches with the plastic
stoppers fitted to them if the hoses are detached from the cooling unit or
the wirefeeder.
WARNING!
A welding operation is not permitted without an extraction unit that is swit-
ched on.
Under certain circumstances, the sole use of a fume extraction torch is not
sufficient.
In this case, install an additional extractor to reduce the pollution level in the
workplace.
If in doubt, a safety engineer should be commissioned to check the pollution
level in the workplace.
39

Publicidad

Tabla de contenido
loading

Tabla de contenido