Display Computer; Display Functions; Further Information - SPORTSTECH DFX75 Manual Del Usuario

Display Functions

Top Display:
SPEED Current Speed in km/h
Lower Display: (Alternating; the small arrow below informs
about the currently displayed parameter.)
ODO Total Distance
TIME Duration of Current Trianing Session
CAL Approximate Calories (kcal) Burned in Current Ses-
sion
DIST Distance Traveled in Current Training Session
SCAN Parameters for the Current Training Session
Service
Start
The computer turns on automatically as soon as it receives a signal from the
pedals' cadence sensor.
• You can also turn on the computer by briefly pressing the red button
Stop The computer will turn off automatically if it does not receive a signal from the
sensor for four minutes.
Default Settings • To reset values for current training session (TIME, CAL, DIST; lower display):
• The total distance traveled (ODO) is reset when the batteries are removed.
Setting for • Briefly press the red button several times until the small arrow points to the
Lower Display
• To change the display, briefly press the red button several times until the small

Further Information

• If the display is dim or non-existent, check that the batteries/rechargeable batteries are inserted cor-
rectly and have sufficient charge.
• The display training computer generates a Bluetooth radio signal which can be processed by a paired
Bluetooth receiver (see "App" section).
• The display training computer receives its signal from the sensor via a wired connection (see the "As-
sembly" section). If no speed is displayed when pedaling, check the cable connection.

9. DISPLAY COMPUTER

Press red button for 4 seconds.
desired parameter.
arrow points to 'SCAN'.
22