Info Function ("Functions" Menu); Filter Sign Reset ("Functions" Menu) - Hitachi SPX-WKT2 Manual De Instrucciones

5.7 INFO FUNCTION ("Functions" menu)

This is the function to display the monthly power consumption
on the remote controller screen.
1 Select "Info" from the menu and press "OK".
The receiving screen will be displayed.
2 The heating power consumption will be displayed.
Press "" or "", the cooling power consumption will be
displayed.
Press "" or "" repeatedly, the heating power
consumption and the cooling power consumption will be
displayed alternately.
NOTE
• Indicated value shall be regarded as a guide only.
The display in stop
The display in operation

5.8 FILTER SIGN RESET ("Functions" menu)

When the unit is operated for a total of about 200 hours,
" " will be indicated on the screen of normal mode, it is
time to clean the filter.
This function is used to turn off the filter sign indication.
( Except auto filter cleaning models )
1 When unit is OFF, select "Filter Sign Reset" from the menu
and press "OK".
The confirmation screen will be displayed.
2 Select "Yes" by pressing "" or "" and press "OK".
" " will disappear from the screen of normal mode.
NOTE
• If during operation this
cannot be selected.
- 18 -
is indicated then function