Other Indications; In Normal Condition; In Abnormal Condition - Hitachi SPX-WKT2 Manual De Instrucciones

8. OTHER INDICATIONS

8.1 In normal condition

8.1.1 External device
"External device" is turned on.
In this case, the operation has been operated from external
device except the remote controller.
Turn on
The display during stop
"External device" will disappear when operated from the
remote controller.
8.1.2 Forced Cooling
It is the operation performed by service personnel or sales agent.
"Forced Cooling" and "External device" are turned on.
It will be displayed during the forced cooling operation.
Turn on
8.1.3 Eco Auto Off
It is the setting performed by service personnel or sales agent.
If "Eco Auto Off" setting is used, when "Eco" operation is started,
" " and " " will be indicated on the screen of normal mode.
"ECO Auto Off Mode" will be indicated on the screen of normal
mode when the operation is stopped by "Eco Auto Off" function
Turn on
The display during operation
Turn on

8.2 In abnormal condition

8.2.1 Communication failure
It occurs when can not communicate with this remote
controller and the indoor unit.
The operation indicator (Red) is flashing and it continues to
display the "Connecting" on the LCD.
In this case, please turn off the breaker and turn on again after
waiting a little.
If the failure recurs after restart, then turn off and contact your
sales agent.
8.2.2 Alarm Code
The operation indicator (Red) is flashing and the alarm code is
displayed on the LCD.
In this case, please turn off the breaker and turn on again after
waiting a little.
If the failure recurs after restart, then turn off and contact your
sales agent.
8.2.3 Thermistor Selection
If the followings are displayed in "Thermistor Selection" function,
please contact the sales agent.
Thermistor of remote
controller is not working.
At least one thermistor is needed to ensure normal operation.
If both thermistors of remote controller and indoor unit are out of
order, please turn off the breaker and contact the sales agent at
once.
- 25 -
Thermistor of indoor unit
is not working.