Important - MSW Motor Technics MSW-MIB-R-380 Manual De Instrucciones

g) Inflate the keel chamber.
h) Assemble and attach the oars. To do this, assemble the element with the blade
and the one with the handle - point the tip with the hole on the other tip with
the pressed pin. Insert one part into the other until the pin clicks into the hole
of the second part, tightening them firmly together. Repeat the step for the
other oar.
i) Attach the oars to the inflatable boat by loosening the knob on the bolts at the
top of each side and inserting the protruding thread through the holes in the
oars (in place of the black bushings). Secure them on the inflatable boat by
reattaching the nuts.
j) Optionally, mount a suitable outboard engine on the device - follow the
instructions in the engine manual.
k) IMPORTANT: before launching the inflatable boat, make sure that it is
completely airtight, i.e. it has not been damaged in transport and its air valves
are tightly closed. To do this we recommend using a water solution with
dissolved soap or washing-up liquid. Spray or pour this solution over key parts
of the inflatable boat such as seams, air valves, etc. and watch for air bubbles
forming on their surface. If there are any, locate the source and eliminate it,