Operating The Unit; Touch Control Panel - Oster CKSTAF3202D Manual De Instrucciones

Operating the Unit

TOUCH CONTROL PANEL

Plug unit into the appropriate
wall electrical outlet and make sure
the basket/pan is inserted into the
appliance's cavity. The on/off button
light will illuminate. Press the on/off
button for 2 seconds to set the air
fryer to the default temperature of
180°C and the timer to 15 minutes.
Press the button again for 2 seconds
to turn off the product [see figure 1].
Note: When product is not in use,
even for a brief moment, turn unit off
and unplug it from the outlet.
This button allows to select
Figure 1
among the 8 pre-programmed
modes. Each of these 8 modes has
a previously defined time and temperature. When one of these programs is selected, your
fryer will automatically adjust to the preset temperature and time.
Press Start/Pause button to start or pause your air fryer.
These buttons let you adjust the frying temperature up or down in increments of 5°C.
Keep the button pressed to adjust the temperature quickly. The temperature can be adjusted
between 80°C and 200°C.
These buttons allow you to change the frying time, varying from minute to minute.
Keep this button pressed if you desire to change the time quickly.
Fan on indicator light.
Display indicator light. It alternates between time and temperature information.
Preset mode indicator light displays the selected preprogramed food function. The
indicator alternates when the button is pressed.
20