Initial Start-Up - Dräger Alcotest 4000 Instrucciones De Uso

en
Use
Switching the instrument off:
1. Hold down the button for about 3 seconds.
A switch off count down will be shown as well. If the display is off, stop
pressing the button. Otherwise the device will be switched on again.
The instrument will switch off automatically approx. 2 minutes after the last
use.
Switching off the instrument does not reduce the waiting period until it is
ready to take a measurement!
4.2

Initial start-up

4.2.1 Default wizard
A setup wizard starts when the instrument is switched on for the first time. This
step is not required for pre-configured instruments.
The following settings are made using the setup wizard:
 Language
Date format

Date

Time format

Time

 Measuring unit
All settings can be changed later on via the menu.
Language
A cursor pre-selects one language in the list. Press briefly on the button to
change the position of the cursor in order to select your needed language. If the
cursor selects the right language please hold the button for approx. 2 seconds to
confirm.
Date
A cursor pre-selects the day of the date. Press briefly on the button to change
the day until the actual day is shown. Please hold the button for approx.
2 seconds to confirm the day. Please continue with the month and the year in the
same way: short press to change and long press to confirm.
6