UFESA HELSINKI Manual De Instrucciones página 16

ASSEMBLY
REMINDING: there are 2 corresponding holes at the base, the 2 pillars at the seat need to pass
through these 2 holes when assembly the base onto the fans.
OPERATION
CONTROL PANEL
16
Attention: the fan can only be used if complete with the su-
pport base (base1 and base 2).
Attention: always unplug the appliance before you assem-
ble.
To assemble it, refer to figure: positioning first the base1 (D)
then the base 2 (E) on the body, making sure to lock with 4
screws supplied (F);
D.Base 1
E.Base 2
F. Attachment screws
LED DISPLAY