Remote Controller - UFESA HELSINKI Manual De Instrucciones

The fan can be operated by the control panel located on the top of the fan or by remote controller.
1. Plug the fan into the standard domestic socket, the LED screen will display the current room
temperature.
2. Press the ON/OFF button (1) ,the fan will start running at Medium speed.
3. Press the SPEED button (2) to select the desired level, Low, Medium, High, the speed level is
displayed on the LED screen.
4. Press the MODE button (3) to set the fan as Normal (6), Natural (7), or Sleep mode (8), the mode
is displayed on the LED screen.
5. Press the OSC button (4) , to allow the fan oscillate the wind direction, to stop the oscillation,
press the OSC button again, the maximum angle is 70 degree.
6. Press the TIMER button (5) to set the desired auto power off time, the timer is from 1 to 12 hours,
the interval is 1 hour.
Note 1: The display becomes dark after switch on 5 minutes, then press any button, it will resume
to bright as before.
Note 2: When press the button each time, it will sound buzzing.
Note 3: On the OSLO WiFi model the display icon 6 changes to the WiFi symbol.

Remote controller

1. Before using the remote controller, remove the plastic protection from the battery.
2. The remote controller battery is CR2025 type.
WARNNING: When not in use for long periods, the plug must always be removed from the socket.
How to use fan with WIFI (ONLY FOR MODEL OSLO WIFI)
Fan with integrated Wi-Fi, usable via mobile phone through application with Android or iOS ope-
rating system.
--Electronic board with integrated Wi-Fi allowing for communication between mobile phone and
fan through APP.
--The APP (application) allows to remotely control the all functions of the fan.
1. Install the "Ufesa Connect" application searching for it on Google Play(android) or from the
AppStore (iOS). The free-of-charge application "Ufesa Connect" is compatible with devices that
17