Unfold The Lower Handle; Install The Upper Handle - GreenWorks Powerall LME476 Manual Del Operador

WARNING
For your personal safety, do not insert battery before the
tool is assembled completely.
7.2

UNFOLD THE LOWER HANDLE

1. To free the lower handle (5) from the lock pin (7); hold
the left and right legs of the lower handle and push in
towards the unit.
2. While the lower handle is free of the lock pins, pull up
the top of the lower handle;
7
10 8
3. Engage the bottom handle hole (8) with the lock pin (9) at
both sides;
4. Tighten the handle knobs (10).
WARNING
Do not damage or pinch the cables when you fold or unfold
the handle.
English (Original Instructions)
5
7
9
7.3

INSTALL THE UPPER HANDLE

12
5
1. Align the holes in the upper handle (3) and the lower
handle (5).
2. Put the cam locks (12) through the holes.
3. Tighten the knobs (11) onto the cam locks.
4. Do the same operation on the other side.
There are two positions to choose while installing the upper
handle.
9
3
12
11
TIP
EN