Speed settings for warm or cool weather depend
on factors such as room size, ceiling height,
number of fans, and so on.
The fan shipped from the factory with the
reversing switch positioned to circulate air
downward. If airflow is desired in the opposite
direction, turn your fan off and wait for the
blades to stop turning, then slide the reversing
switch (located on the light kit pan, refer to
figure 17 on page 8) to opposite position, and
turn fan on again. The fan blades will turn in the
opposite direction and reverse airflow.
9. Operating Your Fan
Warm weather - (Forward) A downward
air flow creates a cooling effect as shown
in Figure 18 . .This allows you to set your
air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward air flow
moves warm air off the ceiling are as shown in
Figure 19. This allows you to set your heating
unit on a lower setting without affecting your
comfort.
Figure 18
Figure 19