Water Maintenance And Chemicals - mspa P-MB049 Manual De Instrucciones

Cumulative use up to 150hrs, or cleaning
Filter
reminder is activated
Cartridge
Not in used for 2~3 days or longer
SPA
Check water quality in time and adjust to
recommended range

WATER MAINTENANCE AND CHEMICALS

Water Sanitation
The spa owner must regularly check and keep the spa water sanitized with scheduled maintenance (daily, if
necessary). Adding sanitizer or other chemical will control bacteria and viruses reproduction in the spa water.
The maintenance of a proper water balance through appropriate use of sanitizers is the most important factor in
maximizing the life and appearance of the spa as well as ensuring clean, healthy and safe water.
Proper technique is important for water testing and treating the spa water. See your spa professional for
chemical, sanitizer, test kit and testing procedures questions.
Water Balance
Follow below instructions to maintain the spa water.
PARAMETER
pH
Free Chlorine
Bromine residual
Total Alkalinity (TA)
Total Hardness (TH)
NOTE:
● Low pH will damage the spa tub and pump. Damage resulting from the chemical imbalance will void the
warranty.
● High pH (hard water) will result in white coagulations inside the filter pump; which may lead to pump
damage.
Water Treatment:
● Always follow the chemical manufacturer's direction, and the health and hazard warning.
● Never mix chemicals together. Add the chemicals to the spa water separately. Thoroughly dissolve each
chemical before adding one to the water.
● Please note that chlorine and bromine products should never be mixed. This is extremely dangerous. If you
usually use chlorine-based products and you want to switch to bromine-based products, or vice versa, it is
FREQUENCY
TEST FREQUENCY
Daily
Daily
Daily
Weekly
Weekly
Clean the filter cartridge or replace it with a
new one.The filter cartridge may need to be
replaced within 150hrs for initial use.
Use an overall cover for protection
Use water treatment products to adjust
7.2-7.6 when using Chlorine;
7.2-7.8 when using Bromine
19
ACTION
CORRECT LEVEL
3-5 ppm
2-4 ppm
80-120 ppm
200-500 ppm