System Setup; Connections And Controls - Bose S1 Pro Guia Del Usuario

System Setup

Connections and Controls

The S1 Pro control panel provides the necessary connectors, controls and indicators for operation.
a
b
c
d
e
f
g
Use Channel 1 and 2 inputs for microphones and musical instruments. Integrated ToneMatch® signal
processing allows microphones and instruments to sound their best. Use Channel 3 for Bluetooth®
connectivity and line-level inputs.
a Signal/Clip indicator: Displays the input signal status in color.
Green: Signal present
Red: Signal clipping
Note: Reduce the corresponding volume control to prevent signal clipping.
b Volume control: Adjust the volume of your microphone, instrument or audio source.
c Treble control: Adjust the high-frequency balance of your microphone or instrument.
Bass control: Adjust the low-frequency balance of your microphone or instrument.
d
e Reverb control: Adjust the amount of reverb applied to your microphone or instrument.
f ToneMatch switch: Move the switch to the
g Channel input: Analog input for connecting microphone (XLR) and instrument (TS unbalanced) cables.
Aux input: Use a 3.5 mm TRS cable to connect a line-level audio source.
h
i Line Output: Use a ¼" TRS cable to connect the line-level output to the Channel 1 or 2 input of a second
S1 Pro to create a mono, two-loudspeaker setup.
Note: Line Out is post mix.
Service port: Micro-USB connector for Bose service use only.
j
q Bluetooth Pair button: Used to set up pairing with Bluetooth-capable devices, such as mobile phones,
tablets and laptops.
Owner's Guide • S1 Pro System
1 2
SIGNAL SIGNAL
or position to enable the ToneMatch preset.
3
SIGNAL
h
System Setup
q
j
i
English • 7