Qlima EOR 2015 Manual De Funcionamiento página 28

4
28
man_EOR2015 ('22) V1.indd 28 man_EOR2015 ('22) V1.indd 28
INSTALLING THE HEATER
1. Carefully remove your heater from the box and check the contents.
In addition to the heater, you also need to have:
- castor wheels
- wing nuts
- arc-shaped brackets
- these directions for use
Keep the box and the packaging materials for storage and/or transportation.
2.
Unpack the Castor Wheels and Arc-shaped Brackets from the product packaging.
3. Turn the radiator upside-down on a scratch-free and stable surface to prevent damage to
the paint finish or your floor surfacing.
4. Fit the two Castor Wheels onto the radiator by placing the Arc-shaped Brackets between
the outermost fins on each side of the radiator.
5. Securely fasten the two Castor Wheels onto the radiator by screwing two Wing Nuts onto
each Foot.
6. Turn the radiator in upright position after the Castor Wheel Assembly fitted.
OPERATION
CAUTION:
Only operate the radiator in normal upright position with Castor Wheel Assemblies
attached to the bottom of the unit, any other position could create a hazardous
situation.
1. Insert the plug in the wall outlet.
2. Press the buttons (2) to switch on the heater (I=600Watt, II=900Watt, I+II=1500Watt). The
thermostat can be used to set the desired room temperature.
28-02-2022 14:23 28-02-2022 14:23