Orbegozo PC 4200 Manual De Instrucciones página 8

PC 4200
When the weight is balanced, press again
screen shows 0 and "T", it indicates that Tare function is working properly.
The weight will be locked after 3 blinks (Screen shows "H"). Press button
scale and start measuring again. The scale will turn off automaticly after 2 minutes inactive.
4. Press the button
TO CONVERT WEIGHT UNIT
Press the button to switch on the device. Weight unit is flashing after LCD shows Zero.
Press the button to select weight unit. After idle for 3 seconds, the weight unit is set and you can
start weighing.
TO REPLACE BATTERY
Please, replace battery when LCD shows "Lo". Open battery case cover on the back of scale:
1. Take out the used batteries.
2. Install new batteries checking the polarity is right.
CARE AND MAINTANCE
Wipe the scale with a slightly damp cloth. Do not immerse the scale in water or use chemical/
abrasive cleaning agents.
Do not stress the triangle ring for long time. During travel, keep the scale away from objects with
sharp ends (such as toy, stationery etc.), in case the scale is switched on frequently and consume
battery power.
To make sure accuracy, do not use this scale in strong magnetic field.
Keep the scale away from babies and children to avoid danger of swallow the batteries and small
components.
KEY
1. LCD Screen
2. Power/Tare/Up
3. Units/Set/Lower
4. Metallic Triangle
5. Hooks
6. Strap
7. Batteries cover
for 3 seconds to switch the scale off.
to use Tare function. When the LCD
to reset the
8