First Steps With The Diagnosis System Iq; Charging The Battery Of The Iq; Switching The Iq 150 On - wow! iQ 150 Instrucciones Breves

1. First steps with the diagnosis system iQ 150

These instructions guide you through the initial steps of using the iQ 150 diagnosis system.
Please refer to and comply with the notes and information in these instructions.
1.1 Charging the battery of the iQ 150
The device has an internal battery, which must be fully
charged before the device is used for the first time.
1. Plug the small connector of the enclosed power
pack into the DC-in port
and the mains plug into a suitable socket-outlet
(100-240V AC voltage).
Warning! Risk of explosion
Use only the original power pack.
1.2 Switching the iQ 150 on
1. Lift the display to open it.
2. Press the On/Off button
ENG-16
"Kuva 001" of the iQ 150
1
"Kuva 001" on the right.
2
1
2
Fig.001
Fig.002
Diagnosis system iQ 150