Symbols Legend - Dea NET724 EVO Instrucciones De Uso Y Advertencias

5.3 Accessing the programming menus
To access the programming menus:
1. With the door stationary, press and hold the [OK] button;
2. Simultaneously press the [+] and [-] buttons until the word "MENU" appears; Release the 3 buttons;
3. Follow the specifi c procedures for entering the "EASY" or "PRO" menus.

SYMBOLS LEGEND

Press and immediately release the button (or buttons)
Press and hold the button (or buttons) for the time indicated or until the status changes
The programming is divided into 2 separate menus, namely the "EASY" menu and the "PRO" menu.
The EASY menu includes a selection of basic parameters used to start the automation. The list of parameters displayed in
the EASY menu varies in relation to the set TYPE.
NOTE: The list of parameters of the "EASY" menu is integrated by any modifi ed parameter (with respect to its DEFAULT
value) in the "PRO" menu. This allows for having a list of all the parameters being used.
The "PRO" menu includes the full list of all available parameters grouped according to sub-categories.
The managed sub-categories are divided into:
SETUP: Parameters that ma-
nage learning of the motors
and the positioning of the do-
ors.
IN/OUT: Parameters that ma-
nage the inputs/ outputs of
connected devices.
TIMES: Parameters that mana-
ge functions associated with
the operating times.
RADIO: Parameters that ma-
nage the remote controls and
the functions associated with
them.
MOVEMENT: Parameters that
manage the movement, speed
and force values of the doors.
EXTRA: Parameters that inclu-
de specifi c functions for cer-
tain types of automations or
systems.
NET724 EVO
Menu EASY
Menu PRO
SYSTEM: Parameters that ma-
nage essential functions for
the system's operation.
SAFETIES: Parameters that
manage the safety devices
and the functions associated
with them.
TEST: Parameters that include
diagnostics functions.
33