Blyss Jelbi M2733DJ Manual Del Usuario página 55

Cancelling the ID card(s)
Cancelling a single card
01
1. Power on, swipe the management card.
The white LED lights up and will beep
to response.
3. Swipe the management card again. White
LED goes off and outdoor unit beep to
response.
5. To exit, press call button or wait about
90 seconds.
Cancelling all cards
02
1. Power on, press and
hold the call button for 3
seconds. The red LED
lights up and a single
"beep" sounds.
3663602632214-Blyss-IM-V13.indb 47
2. Within 10 seconds press the call button.
The red LED flashes and single "beep"
sounds.
4. Swipe the card to be cancelled. The
"beep" sound indicated that the card
was canceled.
2. Swipe the management
card. The 3 "beep"
sounds are emitted.
3. Press and hold the call
button until a single
"beep" is emitted. White
LED flashes once.
12/2/2019 5:48 PM
47