Using Your Appliance; Cleaning And Maintenance - universalblue UVP1000-20 Manual De Instrucciones

ENGLISH
base with the screw with L form
(18) in clockwise direction.
Insert the upper tube (13) into
•
the middle of the lower tube (15),
line up the screw with screw's
hole and tighten the screw.
Insert fans' head (10) in the
•
middle of upper tube and line
up screw's hole, then tighten the
screw (11).
Use the nut attachment (4) to
•
set the back grille (5)
fan's head (6). Now, use the
attachment nut of the blade (2)
to set fan's blade (3).
To place the front grille into
•
the back grille, you must use
the grille ring carefully to keep
them together and tighten the
ring with the screw provided.
If the appliance is going to operate
as desk fan
In this case, follow instructions
previously mentioned, removing
the upper tuve (13) from the
process. The lower tube (15) will
be assembled with the fan's head
directly (10).

USING YOUR APPLIANCE

: Before inserting the
NOTE
plug into a power outlet,
make sure that the voltage
corresponds to the one
indicated on the product label, and
that the plug
connection.
14
to the
has a ground
To see the control panel of the
product go to page 4 .
Select "Speed 0" position on the
back of the motor cover and plug
the wire into the socket.
Once plugged, select the desired
speed, considering "Speed 1" as
lower speed, "Speed 2" as medium
speed and "Speed 3" as high speed.
Selecting "Speed 0" position the fan
will stop working.
This fan has swing option as well.
Swing button is located at the top
of the motor cover. Please, press the
button to turn on the fan oscillation
function. On the other hand, pull
the button to cancel this function.

CLEANING AND MAINTENANCE

This appliance does not require
a lot of maintenance. However,
in order to extend the life of the
appliance, we suggest that you read
the following notes about cleaning
and maintenance:
Switch off and unplug from the
•
power supply before assembling
or disassembling and cleaning.
Keep the air grills at the back of
•
the main body free from dust–
use a vacuum cleaner to remove
these when necessary.
Fan parts should be cleaned
•
using a mild soap and a damp
cloth or sponge. Do not allow any