Before Installation; Important Information For The Refrigerant - Sime SHP M PRO Manual De Instalación

Ocultar thumbs Ver también para SHP M PRO:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4 BEFORE INSTALLATION

Before installation
Be sure to confirm the model name and the serial number of the unit.
Transport
Due to relatively large dimensions and heavy weight, the unit should only be hoised by lifting tools with slings, please refer
to the following picture.
Protect Angle
The position of barycenter for different units can be seen in the picture below.
A
C

5 IMPORTANT INFORMATION FOR THE REFRIGERANT

This product has the fluorinated gas, which is forbidden to release to air.
Refrigerant type: R32; Volume of GWP: 675.
GWP=Global Warming Potential
Model
5kW
7kW
9kW
12kW
14kW
16kW
Foam
Protect Angle
The hook and
barycenter of the
unit should be on
a line in vertical
direction to
prevent improper
inclination
Factory charged refrigerant volume in the unit
Refrigerant/kg
1.25
1.25
1.25
1.80
1.80
1.80
07
CAUTION
To avoid injury, do not touch the air inlet or aluminum fins
of the unit.
Do not use the grips in the fan grills to avoid damage.
The unit is top heavy! Prevent the unit from falling due to
improper inclination during handling.
Model
A A
1 phase 5/7/9kW
350
1 phase 12/14/16kW
540
3 phase 12/14/16kW
500
B
Tonnes CO
0.85
0.85
0.85
1.22
1.22
1.22
(unit:mm)
B
C
355
285
390
255
400
275
A
equivalent
2

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido