Carl F. Bucherer MANERO POWERRESERVE Manual De Instrucciones página 3

M A N E R O P OW E R R ES ERV E LEGEND
Day of the week
Big date
Crown
Position 1: Set date/
day of the week
Position 2: Set time
1 2
Power reserve
Small seconds
6 | E N G L I S H
YOUR WATCH
With its precise CFB A1011 mechanism of our own design
with a peripheral rotor and power reserve display, the
Manero PowerReserve combines high functionality with
sophisticated technology. The changing optics of the dial
successfully transition in the stainless steel case. The
Manero PowerReserve skilfully combines classic and modern
components in its design and its technology.
TECHNICAL DATA
Automatic movement CFB A1011
Depth of the
movement 6.3 mm
Diameter of the
movement 32 mm
Number of jewel
bearings 33
Water resistance * 30 m | 3 atm
* see the chapter on "Water resistance"
START THE WATCH SET TIME
The movement is wound by the motion of the In order for the date to properly move at
wrist when worn. When not worn, the watch midnight, the hour hand must intentionally
stops after approximately 55 hours and has be set to a.m. or p.m. based on the current
to be wound manually. time.
1 Rotate the crown clock- 1
wise until the power
reserve indication hand
has gotten at least to the
middle of the scale.
2 The entire scale area 2
displays a power reserve
of about 55 hours.
3
Pull the crown until it is
in position 2. The second
hand does not move.
Move the crown counter-
clockwise until the date
changes. Then deliberately
set the current time either
a.m. or p.m.
Push the crown back to
the initial position. The
second hand is back in
motion.
E N G L I S H | 7