Remove The Adapter/Damper; Remove The Cabinet Brackets - Best Powerpack Inserts HBN1 Serie Instrucciones De Instalación, Uso Y Cuidado

REMOVE THE ADAPTER/DAMPER

AND 6-IN. ROUND DAMPER
Detach and set aside the 3¼" x 10" adapter/damper and the
6-in.-round damper (grey parts in FIG. 2) from back and side
of the powerpack insert by removing their 2 retaining screws.
Discard the screws.

REMOVE THE CABINET BRACKETS

Detach the cabinet brackets (grey part in FIG. 3) from the back
of the powerpack insert by removing its 3 retaining screws.
Discard the screws.
Fold up and down the bracket until it is split in two separate
parts (FIG. 4). Keep the brackets for possible further use.
NOTE: Both cabinet brackets have one wide edge and one
narrrow edge (FIG. 5), to cover all installation
configurations depending on cabinet widths.
6
SCREWS
Narrow edge
Wide edge
FIG. 2
FIG. 3
FIG. 4
FIG. 5