Connect The Ducting; Establishing The Connection For The Exhaust Air - Thermador Masterpiece VCI3B30ZS Guia De Instalacion

I N S T A L L A T I O N

Connect the ducting

NOTES:
• If an aluminum duct is used, smooth the connection area beforehand.
• VCI3B30ZS or VCI3B360ZS model: Exhaust air duct dia. 6" (150 mm).
• VCI6B30ZS or VCI6B360ZS model: Exhaust air duct dia. 8'' (205 mm).

Establishing the connection for the exhaust air

1. Attach the exhaust air duct directly to the air duct connector. Attach
the other end of the duct to the ductwork above.
2. Seal the joints with metal foil duct tape.
Establishing the connection for the recirculated air
1. Attach the exhaust air duct directly to the air duct connector.
2. Establish the connection to the opening on the cabinet unit.
3. Screw the air guide grill (not included) to the cabinet. Fit the air guide
grill so that the air can fl ow out freely.
4. Seal the joints with metal foil duct tape.
5. Install the charcoal fi lter.
WARNING
Improper installation of gas appliances and ventilation hoods can create
a risk for carbon monoxide which can be harmful. To reduce the risk of
carbon monoxide poisoning, ensure the gas appliance is properly installed
according to the manufacturer's instructions, as well as ensuring the hood is
vented to the outside for proper exhausting of gases or fumes.
Refer to local building codes for latest requirements and restrictions when
installing ventilation products in recirculation mode.
Page 13