Before You Begin; Tools And Material Needed; Parts Supplied; Unit Dimensions - Thermador Masterpiece VCI3B30ZS Guia De Instalacion

B E F O R E Y O U B E G I N
Tools and material needed (not included)
UL approved 7/8" diameter
•
2 Wood blocks 7¼" maximum long x 2"minimum height, thickness
•
to fi t cabinet dimensions (see Prepare the cabinet on page 11)
Flat head no. 8 wood screws (to secure the wood blocks to the
•
cabinet)
Aluminum duct tape (DO NOT use insulating tape)
•
Measuring tape
•
Pencil
•
Drill
•
1/8" Wood drill bit
•
Saber saw or jig saw
•
Wire stripper or utility knife
•
Cross-shaped screwdriver no. 2
•
Tin snips
•
Safety glasses and work gloves
•
CAUTION
It is recommended to wear gloves and long sleeves to protect hands
and forearms from abrasion and potential scratches during the
installation process and servicing.

Parts supplied

Unpack the unit and check the content of the box.
A
B
OR
C
A: Parts bag containing: 8 Cross-shaped screws, no. 8 x 3/8" and
4 Cross-shaped screws, no. 8 x 3/4"
B: 6'' Ø duct connector for VCI3B30ZS or VCI3B36ZS model
C: 8'' Ø duct connector for VCI6B30ZS or VCI6B36ZS model
D: Unit shell
E: Unit module and frame assembly.
Page 8
strain relief
D
E

Unit dimensions

A: 10½" (267 mm) unit with module and frame assembly installed
A: 10¼" (260 mm) unit without module and frame assembly installed
B: 6'' Ø duct connector: 2 ³/ (60 mm)
8
B: 8'' Ø duct connector: 2 ¹/ (54 mm)
8

Optional accessories

Optional accessories are available for separate purchase.
Charcoal fi lter kits
Charcoal fi lter kit (mandatory for recirculation installation only). Refer
below for the part numbers:
Unit Model
VCI3B30ZS
VCI6B30ZS
VCI3B36ZS
VCI6B36ZS
Built-in remote control
REMCPW: Built-in remote control accessory
•
Charcoal Filter Kit
CHFVCI30ZS
CHFVCI36ZS