Ice Chute; Water Trough; Spray Bar, Water Pump And Hose; Spray Bar Disassembly - Manitowoc CrystalCraft Premier Manual De Instalación, Operación Y Mantenimiento

Section 4

ICE CHUTE

The ice chute is positioned over the spray nozzles and allows
the ice to easily fall into the bin. It must be firmly positioned
over the spray bar, with the front edge inside the water
trough. Spray nozzles must be align with the spray holes or
spray water will fall into the bin.
1. Grasp and lift up and forward to remove.
2. Reverse procedure to re-install ice chute and reposition
over the Water Distribution Assembly.
Make sure rear supports are over spray bar, and front edge is
inside of water trough.

WATER TROUGH

1. Depress tabs on right and left side of the water trough.
2. Allow front of water trough to drop as you pull forward
to disengage the rear pins.
Part Number 000016662 Rev 01 01/22

SPRAY BAR, WATER PUMP AND HOSE

1. Remove spray bar clamp and spray bar.
2. Remove the 5/16" water pump mounting screw.
3. Grasp pump and pull straight down until water pump
disengages and electrical connector is visible.
4. Disconnect the electrical connector.
5. Remove the water pump from ice machine.
6. Remove clamp from hose to remove from pump.
7. Do not soak the water pump in descaler or sanitizer.
Wipe the pump and ice machine base clean.

SPRAY BAR DISASSEMBLY

The spray bar supplies water to the individual ice making
cups. Water from the water pump sprays through the
nozzles, located on the upper portion of the tubes.
1. Grasp one end of the spray bar, lift up and remove from
seat formed in evaporator bucket.
2. Remove clamp on water inlet tubing by grasping both
ears on clip and separating.
3. Apply food grade lubricant to ease re-assembly of spray
bar components when necessary.
4. To re-install spray bar, position water inlet tubing on inlet
ports, and squeeze clips until tight.
5. Reposition assembly on water trough seat.
Nozzles and inserts can be removed for cleaning by
unscrewing nozzles. Inserts are located inside the spray bar
ports. The spray bar also disassembles for easy cleaning.
Maintenance
21