Adjusting The Legs; Installation Of The Cooler And Freezer Products Side-By-Side; Hot Surface Warning - Beko B5RMLNE444HW Manual Del Usuario

4.4 Adjusting the Legs

If the product is not in balanced position, ad-
just the front adjustable legs by rotating
them to right or left.

4.6 Hot Surface Warning

The side walls of your product are equipped
with cooler pipes to enhance the cooling
system. High pressure fluid may flow
4.5 Installation of the Cooler and
When the freezer and cooler products are in-
stalled side by side, the installation should be
performed so that the freezer product (1) will
be on the left and the cooler product (2) will
be on the right. To prevent sweating prob-
lems that might occur between products,
anti-condensation elements are located on
the left side of the cooler product.
Freezer ( 1 )
through these surfaces, and cause hot sur-
faces on the side walls. This is normal and it
does not require servicing. Be careful when
you contact these areas.
EN / 14
Freezer Products Side-by-side
Cooler ( 2 )