Insignia NS-RMT3D21 Guia Del Usuario página 9

4 Enter the first four-number code listed for your
brand (for example, 1840 for LG). The LED blinks
twice when the last number of the code is entered.
5 Point your remote towards your device and press
the
remote is ready to use. If not, repeat steps 2-5 with
the next code in the list.
Setup method 3 - function learning
Your Insignia universal remote control can learn any
function from any other working remote control. This
is a one-time setup that lets you control any infrared
controlled device you have. It also lets you add a
button function that may be missing to a spare button
on the universal remote control.
To do this, make sure that you have all of your original
remote controls handy, and that they have fresh
batteries.
1 Point the original remote control at your Insignia
universal remote control from approximately two
inches away.
2 Press the button on the original remote control for
the device you want to learn functions.
3 Press and hold the SETUP button on your Insignia
universal remote control until the LED under the
device button blinks twice.
4 Press 975. The LED blinks twice.
5 Press the button you want to learn (for example the
TV Power button). The LED begins to blink rapidly.
6 Press the corresponding button on the original
remote (for example the
LED blinks twice to indicate the button has learned
correctly.
(power) button. If the device turns off, your
www.insigniaproducts.com
Three-device Universal Remote
[power] button). The
9