Cleaning - Imetec F7503 Instrucciones Para El Uso

IMPORTANT! RISK OF SCALDING
During use, the external parts marked in Figure 1 become very
hot. Be particularly careful not to place these parts in contact
with the skin or fingers while using the straightener.
Figure 1
Before applying or removing the shells (12, 13, 14, 15), make
sure the straightener is cold.
AUTOMATIC SWITCH-OFF
The straightener switches off automatically 1 hour after being
switched on.
Switch off the appliance by pressing the
disconnect the plug (6) from the socket.
• Wait for the plates (11) to cool down.
• Clean the surface of the plates (11), the heated bodywork
(2) and the handle with a soft, damp cloth.
Make sure all cleaned parts are completely dry
before reusing the appliance.

CLEANING

15
EN
button (8) and