universalblue UBLA2804-21 Manual De Instrucciones página 61

Transportation bolt
The washers are installed with a transport bolt to prevent internal
damage during transportation.
Dismantle the transport bolt
1. To avoid internal damage during transportation, four bolts are
installed. Before using the washing machine, disassemble the
bolt (see chart 1). If the bolts are not disassembled, violent
vibrations, noise and problems will appear.
2. Use the supplied wrench to loosen the four bolts (see chart 2).
3. Slightly twist the bolt rubber and then pull it out. Keep the bolts
and wrench (see chart 3). The bolts should be reassembled
when the washing machine is transported again.
4. Use the enclosed stopples to seal the screw holes (see chart
4).
61