universalblue UBLA2804-21 Manual De Instrucciones página 64

The connection of inlet pipes and taps
Check the rubber seals on both sides of the
hose. Insert a rubber seal into the threaded
fittings on each hose to prevent leaking.
Connect the water supply hoses to the water
faucets tightly by hand and then tighten another
2/3 turn with pliers. Connect the blue hose to
water faucet.
WARNING: Do not overtighten. Damage to the coupling can
result.
After connecting inlet hose to water faucets,
tum on the water faucets to flush out foreign
substances (dirt, sand or sawdust) in the water
lines. Let water drain into a bucket, and check
the water temperature.
Connect the hoses to the water inlet
tightly by hand and the tighten another
2/3 turn with pliers.
WARNING: Do not overtighten the hoses. Overtightening
can damage the valves resulting in leaking and property
damage.
Check for leaks by turning on the faucets. If water leaks, check
steps 1 to 4 again.
 The washing machine is designed for domestic use; do not
install it on a boat, travel truck or airplane.
 Please close the water stopcock if it is not used for a long time
(e.g. vacation).
64