Switching The Device On And Off - universalblue UBLAV2702-21 Manual De Instrucciones

8. SWITCHING THE DEVICE ON AND OFF

TURN ON THE DISHWASHER
 Open the dishwasher baskets and insert the dishwasher. It is
recommended to load the lower basket first.
 Add detergent.
 Connect the device to the light, observing the voltage
instructions of the device.
 Make sure the water supply is connected to maximum
pressure. Close the dishwasher door and press the "Power"
button.
 Press the "Program " button to select the desired wash cycle.
NOTE: A "click" is heard when the door is perfectly closed.
When you have finished washing, you can turn off the
switch by pressing the "Power" button.
CHANGE THE SELECTED PROGRAM
A cycle that is running can only be changed if it has been running for
short time. Otherwise, the detergent may have already been released
and the appliance may contain water.
Press the "Power" key to cancel the program and turn it on again.
Select the desired wash program.
NOTE: If you open the door during washing, the machine
stops and a warning alarm sounds. The display shows code
E1. When the door is closed, the machine will continue to run
after 10 seconds.
The 6 program lights show the state of the dishwasher:
a) One of the lights in the program lights up: it means that the cycle
is running.