After-Sales Service - universalblue UBLAV2702-21 Manual De Instrucciones

 After each wash, close the water supply and leave the door
slightly open so that moisture and odors are not trapped
inside.
 Before cleaning, always remove the plug from the outlet.
 To clean the exterior and rubber parts of the dishwasher, do
not use solvents or abrasive cleaning agents. Use only warm,
soapy water.

To remove stains on the interior surface, use a cloth
dampened with water and a little white vinegar, or a product
specifically designed for interior dishwasher maintenance.
 When the appliance is not to be used for some time, it is
recommended that a washing cycle be run with the
dishwasher empty. Then disconnect the plug from the mains,
cut off the water supply and leave the door slightly open. This
will prevent the damage in the saels and they will last longer,
also prevent odors from forming in the appliance.
 If the device has to be moved, try to keep it in an upright
position.
 Moving the Appliance: If the appliance must be moved, try to
keep it in the vertical position. If absolutely necessary, it can
be positioned in to is rear.
 Seals: One of the factors that cause odors to form in the
dishwasher is food that remains trapped in the seals. Periodic
cleaning with a damp sponge will prevent this.
10.

AFTER-SALES SERVICE

LIST OF DEVICE ERROR CODES
When the device is not working properly, the display will show an error
code to indicate the problem.
ERROR RELATIONSHIP
CODE WITH
E1 Door open
MEANING
The dishwasher door is open during
operation of the appliance.
84