Basic Operation - Blaupunkt BPA 3022 M Manual De Instrucciones

OPERATION
EN

BASIC OPERATION

Turn on/o the unit and Mute function
Press /MUTE knob to turn on the unit. When the unit is on. Shortly press this
knob for mute on/o . Press and hold this button to turn o the unit.
Audio and setting menu adjustment
Press and hold SRC/MENU button into the menu as below:
BAS->TRE->BAL->EQ(o /pop/rock/clas)->LOUD(on/o )->CLK HH->CLK
MM->IR(on/o ) ->CT(indep/sync)->BEEP(on/o )->P_VOL(13)->DX(LOC)->STE-
REO(MONO)
In each item rotate the VOL knob to set them.
IR (ON/OFF):
IR ON: The unit can be switched on by IR remote control.
The system is in high power consumption status.
IR OFF: The unit can not be switched on by IR remote control.
The system is in low power consumption status.
CT (INDEP/SYNC):
CT INDEP: The clock works independently.
CT SYNC: The clock will be synchronized to the received RDS station's time.
Note: When the clock was set in the menu, The CT is set to INDEP mode
automatically.
BEEP (ON/OFF): Turn on/o the beep sound when buttons are pressed.
P-VOL: Setting the power on volume. If the volume at switch-o is lower than
the P-VOL, the unit will set the volume to the value of the switch-o volume
when it is switched on.
If the volume at shutdown is greater than the P-VOL, the volume will be restored
to the
P-VOL value when the unit is switched on.
Bluetooth speaker search
Press and hold BT button shows "SEARCH.. " . Seconds later shows the Bluetooth
device name. Rotate VOL knob to show next one. When the desired Bluetooth
speaker name was shown on LCD. Press VOL knob to pair. If the pairing is
succeed, it shows BOX ON.
Important note: Despite numerous tests with various Bluetooth devices,
compatibility with all Bluetooth devices available on the market cannot be
guaranteed.