Rechargeable Battery - Bosch GSC 18V-16 E Professional Manual Original

12 | English
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
a)
(1) Battery
a)
(2) Battery release button
(3) On/off switch
(4) Chip deflector
(5) Handle (insulated gripping surface)
(6) Fastening screw for upper cutter
(7) Upper cutter
(8) Bottom cutter
(9) Set screw for bottom cutter
(10) Fastening screw for bottom cutter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless metal shears
Article number
Rated voltage
No-load stroke rate n₀
Max. steel sheet cutting ca-
B)
pacity
Smallest curve radius
Weight according to EPTA-
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
D)
ure during operation and
during storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable
battery GBA 18V 4.0Ah and depending on the battery's state of
charge as well as the power tool's operating temperature
B) Refers to steel sheets of up to 400 N/mm
C) Depends on battery in use
D) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑8.
Typically, the A-weighted sound pressure level of the power
tool is 77 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
1 609 92A 7XM | (26.07.2022)
Vibration total values a
determined according to EN 62841‑2‑8:
a
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
GSC 18V-16 E
ator from the effects of vibration, such as servicing the
3 601 J26 3.. power tool and application tools, keeping their hands warm,
and organising workflows correctly.
V= 18
−1 A)
min 3200

Rechargeable battery

mm 1.6
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
mm 20
tery is included with the power tool by looking at the pack-
C)
kg 2.0–3.0
aging.
Charging the battery
°C 0 to +35
u
°C –20 to +50
Note: Lithium-ion rechargeable batteries are supplied par-
GBA 18V... tially charged according to international transport regula-
ProCORE18V... tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
GAL 18...
the first time.
GAX 18...
GAL 36...
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
2
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
The rechargeable battery has two locking levels to prevent
the battery from falling out if the battery release button is
pressed unintentionally. The rechargeable battery is held in
place by a spring when fitted in the power tool.
(triax vector sum) and uncertainty K
h
2 2
= 7.5 m/s , K = 1.5 m/s .
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Bosch Power Tools