Use - Qilive Q.6933 Manual Del Usuario

EN
4. Fix the front guard (1)
• Position the front guard (1) over the rear guard (5) while ensuring the marks "I" and
"II" on the front guard (1) are up, and align the mark "I" on the front guard (1) with the
mark "I" on the rear guard (5).
• Then turn the front guard (1) clockwise until the mark "I" on the rear guard (5) is
located in the center of the mark "II" on the front guard (1).
• Finally tighten the front guard (1) with the safety screw (14).

5. USE

Caution:
• Make sure that the product is placed on a flat and stable floor.
• The power socket must be in the vicinity of the fan and easily accessible.
• Always position the power cord so that nobody can trip over or become entangled
in it.
5.1 First time use of the remote control
When the remote control is used for the first time, you need to pair the remote control
with the fan so that they can work with each other.
1. Connect the mains plug of the power cable (9) to the mains (220 - 240 V/AC, 50 Hz).
10