Maintenance And Cleaning; Guarantees And Limitations Of Liability - Qilive Q.6933 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
EN
1

6. MAINTENANCE AND CLEANING

WARNING: Switch the product off and unplug it from the mains socket before each
cleaning.
WARNING: Do not remove the fan guards for cleaning or maintenance.
WARNING: Allow the product to cool off before handing or cleaning it.
Clean the product with a soft dusting cloth.
Do not allow water or other liquids to enter into the engine unit (8) as it can cause
short circuits, fires, electric shocks or other hazards.
Do not use any aggressive cleaning liquids, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
Keep the air vents at the rear of the engine unit (8) from dust and lint.
You can use a vacuum cleaner to remove dust and lint from the air vents and the
fan guards.
Store the product in a cool and dry place if it is not used for a long time.

7. GUARANTEES AND LIMITATIONS OF LIABILITY

This product is guaranteed for a period of 36 months (including the legal guarantee of
24 months as defined by local law as well as a commercial guarantee of 12 additional
months offered by the brand) from the date of purchase, against any failure resulting
from a manufacturing or material defect.
This guarantee does not cover damage resulting from a faulty installation, incorrect use,
or normal wear and tear. More specifically, the guarantee does not cover:
Damage or problems caused by incorrect use, accidents, modifications or an
electrical connection with the wrong current or voltage.
Products that have been modified or whose tamper evident seal or serial number
has been damaged, altered, removed or rusted.
Replaceable batteries and accessories are guaranteed for 6 months.
Battery failure, as a result of over-charging or non-compliance with the safety
instructions set out in the manual.
Cosmetic damage, including scratches, dents, or any other element.
Damage caused by any servicing operations carried out by non-authorised persons.
Faults caused by normal wear and tear or the normal ageing of the product.
Software updates as a consequence of changes to network settings.
Product failure resulting from the use of third party software to modify, change or
adapt the product as supplied.
Product failure resulting from its use without manufacturer-approved accessories.
Rusted products.
The manufacturer is not liable for the loss of data stored on the hard drive. Similarly,
2
A
12

Publicidad

Tabla de contenido
loading

Tabla de contenido