Important; Turning The Unit On - Oster PRIMALATTE II TOUCH Manual De Instrucciones

a.
PLACING THE CUP(S)
a. Adjust the height by inserting the removable drip grid in the height-adjusting slot if you are
using a small "demitasse" cup(s) to brew espresso.
b. Keep the removable drip grid on top of the removable drip tray if you are using a larger cup to
brew cappuccino or latte.
a.
IMPORTANT: When brewing cappuccino or latte, please make sure to adjust the frothing tube
lever in order to position the frothed milk dispensing tube to point inside the cup that is being
used.

TURNING THE UNIT ON

a. Make sure unit is plugged into the appropriate electrical outlet.
b. Turn unit on "I" using the on/off "I/O" switch located on the right side on the unit.
The control panel progress bar will illuminate (Espresso heater and Steam heater " ") during the
heating process and until the water and milk (if preparing cappuccino or latte) reach the perfect
temperature. Once the progress bar is a fully illuminated and a solid light, the unit is ready to use.
BVSTEM6801_22SEPM1 (LA).indd 10 BVSTEM6801_22SEPM1 (LA).indd 10
b.
b.
a.
English-10
c.
c.
b.
2022/6/6 9:53 AM 2022/6/6 9:53 AM