Teamtex OXALIS Manual De Instrucciones página 18

EN
USING THE CHILD CAR SEAT
Adjusting the tilt angle of the car
seat
• With one hand, use the lever on the lower front
side of the seat bucket to adjust the tilt.
• Hold the back of the seat bucket back with your
other hand and adjust the tilt.
• If the child car seat is used in a rear-facing position,
please always have it set to the maximum reclining
position. (Position 4, blue)
• Positions 1 + 2
ed for forward
(9-18 kg), all the 3 positions may be used. For group
2/3 (15-36 kg) only position 1.
Turning the car seat
• Use one hand to pull the lever at the front of the
seat and use your other hand to turn the seat
bucket. The lever can be released when turning
the seat bucket.
• The seat offers four locking positions: at 90, 180,
270 and 0 out of 360 degrees to the base. The seat
bucket makes an audible click when it is moved
into one of these positions.
• If the child car seat is used in a rear-facing position,
please always have it set to the maximum reclining
position. (Position 4, blue)
• Positions 1 + 2
ed for forward
(9-18 kg), all 3 positions may be used. For group
2/3 (15-36 kg) only position 1.
Only forward-facing
- 18 -
+ 3 are only
installation. For group
+ 3 are only
installation. For group
Only rear-facing
intend-
1
intend-
1
270°
0/360°
90°
180°
Adju
• To lo
ton a
• Use
belt
• If yo
men
Please
such a
Open
• To r
belt
• To c
tong
Adju
• Loos
the
heig
• Rele
lock