Technical Data; Ec Declaration Of Conformity - Black and Decker KR7532 Traducción De Instrucciones Originales

ENGLISH

Technical data

Input voltage V
AC
Power input W
No load speed
min
-1
Impact rate min
-1
Max. drilling capacity
Concrete mm
Steel mm
Wood mm
Weight kg
Input voltage
V
AC
Power input W
No load speed min
-1
Impact rate
min
-1
Max. drilling capacity
Concrete
mm
Steel mm
Wood mm
Weight kg
Declared dual-number noise emission values in accordance with
Measured A-weighted sound power level, L
Uncertainty, K
Measured A-weighted emission sound pressure level at the work station, L
in decibels = 100 dB(A)
Uncertainty, K
Vibration total values (triax vector sum) determined according to EN62841
Impact drilling into concrete (a
Drilling into metal (a
h, D
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
KR7532, KR8542, KR911, KR1102 Rotary Impact Drill
Black & Decker declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
8
(Original instructions)
KR7532 (Type 1) KR8542 (Type 1)
230
750
0-1100 / 0-3100 0-1100 / 0-3100
0-18,700 / 0-52,700 0-18,700 / 0-52,700
16
13
50
2.5
KR911 (Type 1) KR1102 (Type 1)
230
910
0-1100 / 0-3100 0-1100 / 0-3200
0-18,700 / 0-52,700 0-18,700 / 0-54,400
18
13
50
2.6
EN62841
(ref. 1pW), in decibels = 111 dB(A)
WA
, in decibels = 5 dB(A)
WA
(ref. 20μPA),
PA
, in decibels = 5 dB(A)
PA
) 13,5 m/s , uncertainty (K) 1.5 m/s
2
h, ID
) 4,3 m/s , uncertainty (K) 1.5 m/s
2 2
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
230
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
850
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
16
cal file and makes this declaration on behalf of
13
50
2.6
230
1100
20
16

EC declaration of conformity

50
2.8
KR7532, KR8542, KR911, KR1102 Rotary Impact Drill
Black & Decker declares that these products described
under "technical data" are in compliance with:
EN62841-1:2015 , EN62841-2-1:2018+A11:2019.
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU. For more information, please
2
contact Black & Decker at the following address or refer to the
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
S.I.2016/1091 (as amended).
2012/3032 (as amended).
Black & Decker.
Director - Consumer Power Tools
Black and Decker UK, 270 Bath Road, Slough
Berkshire, SL1 4DX
%
MACHINERY DIRECTIVE
back of the manual.
Black & Decker .
Patrick Diepenbach
General Manager, Benelux
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
Ed Higgins
United Kingdom
09/11/2021
Black and Decker,
09/11/2021