Problem Solving Guide - Fagor 3LVF-423.1 Manual De Instrucciones

PROBLEM SOLVING GUIDE

Problem
The dishwasher will not start
The dishwasher does not start
The wash cycle takes too long
The dishes are not clean enough
The dishes are not dry enough
94
Possible cause
The appliance is not connected
to the mains power
Child lock is on (selected
models)
The Delay start function is
selected
The dishwasher door is open.
The temperature of water sup-
plied to the dishwasher exceeds
70°C
The appliance does not fill with
water
The duration of the wash pro-
gramme varies depending on
how soiled the dishes are
Self-cleaning option (selected
models) is selected
The detergent is used incorrectly
The dishes are arranged too
close together.
The selected wash programme
is not suitable for the level of soil
on the dishes
The spray arm rotation is
blocked
The rinse aid dispenser is empty
Dishes placed incorrectly in the
dishwasher
The selected programme dose
not include the drying stage
Solution
Connect to the power supply
Turn off the Child Lock
Wait for the programme to start
Close the door.
Reduce the temperature of the
supplied water or wait until the
water temperature is lower.
Check that the water tap is open
When heavy soil is detected,
Auto and Optimal programmes
automatically extend the wash
cycle duration
When you select the self-clean-
ing option, the wash cycle time
will be extended to reach the
disinfection temperature
Use the amount of detergent
suitable for the water hard-
ness and the selected wash
programme or use a different
detergent
Rearrange the dishes in accord-
ance with the instructions.
Select a different programme
Arrange the dishes again so that
they do not block the spray arm.
Fill the rinse aid dispenser or
increase the dispensed amount
Rearrange the dishes in accord-
ance with the instructions.
Select the wash program that
includes drying