Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Adjust the rinse aid dispenser
To achieve better drying results you can adjust how much rinse aid is used. Follow
these steps.
1. Connect the appliance to the wall power outlet
2. Within 60 seconds after step 1, press and hold the „Program" button for more
than 5 seconds, then press the delay button to enter the desired setting. The
rinse aid indicator blinks once every second.
3. Press the „Program" button to select the desired setting according to your local
requirements. The following settings are available: D1->D2->D3->D4->D5->D1,
The most rinse aid is dispensed with the D5 setting The default setting is D3.
Wait 5 seconds or press the power button to save the new setting and exit the rinse
aid dispenser adjustment mode.
86
Publicidad
Tabla de contenido
