Assembly - FITFIU FITNESS GYM-300 FIT000203 Manual De Instrucciones

132

ASSEMBLY

NOTE:
1. The washer should be placed on both ends of all bolts (against the bolt head and against the
nut) unless otherwise specified in these instructions.
2. Hand tighten all bolts on initial assembly and finally tighten with the spanner once the entire
structure is erected.
3. Some parts may come pre-assembled from the factory.
4. Assembly requires the assistance of another person.
STEP 1
NOTE: Tighten the screw (#22) and bolt (#57) here.
Nº Description Qty.
22 Countersunk screw M10*25 2
64 Flat washer Ø10 12
GYM-300
Nº Description Qty.
57 Hexagonal screw M10*75
67 Nylon nut M10
133
6
6
EN