Fromm & Starck STAR ATFE 10 Manual De Instrucciones página 25

II. Connect lifting columns (2) and (3) to crossbeams (5) and (6) and tighten the
screws (D) using the wrench (F).
Step 2:
III. Install the feet (1).
IV. Connect the feet (1) to the lifting columns (2) and use the wrench (F) to tighten
the screws (C).
Step 3:
V. Install side brackets (4).
VI. Attach the side brackets (4) to the crossbeams (5) and (6); use the wrench (F)
to tighten the screws (A).