Fromm & Starck STAR ATFE 10 Manual De Instrucciones página 26

Step 4:
VII. Install the desk top, the control box (14) and the control panel (9).
VIII. If an extension of the crossbeam is required, proceed as follows:
• loosen (L),
move (P),
•
• tighten (T).
Step 5:
IX. Connect all cables to the sockets in the control box (11):
• connect the signal cable from the control panel to the socket (G1),
connect the power cord to the socket (G2),
•
connect the signal cable from the lifting column to the socket (G3).
•