Device Overview - auna SELECT Unison Retrospective Manual De Instrucciones

EN
48

DEVICE OVERVIEW

1 CD compartment
Display
2
Headphone input
3
External antenna connection
On the back of your Unison you will find a connector for an external
antenna. There are different models for external antennas, the connection
is typically established via screwing on the external antenna.
Loudspeaker connection
We recommend using speaker cables with a diameter of at least 1.5 mm²
for your shelf speakers. The shorter the cable, the better the sound. Cables
up to about 5 m in length are absolutely safe to use. First connect one end
of the cable to your speaker. When connecting the other end to the Unison,
make sure that you connect the PLUS pin (red) of the Unison to the PLUS pin
of the speaker and the MINUS pin of the Unison (black) to the MINUS pin of
the speaker.