DCU Tecnologic 34152040 Manual De Usuario página 19

ENG
Bluetooth connection:
1. Open the charging case.
The left and right earbud will automatically
power on and pair.
2. Ready to pair (orange/green light flashes
alternately).
Until the left/right earbud flashes orange/green
light alternately every 7 seconds, the earbuds
are paired successfully.
3. Open your Bluetooth device setting and
search "ANC_DCUTEC", then click to
complete the connection.
4. If the connection fails, please put the
earbuds back into the charging box and repeat the above steps.
* Please tear off the insulation sticker on the earbuds contacts before using it.
* After the first connection, the earbuds will automatically connect back to the last
paired device (Bluetooth device needs to be turned on).
Battery display sync:
Support iOS/Android mobile phone displays the earbuds battery level near the upper
right corner of the screen.
Clear and repairing Bluetooth connection:
When the charging case is in the charging state, put the earbuds into the charging
case, triple-tap the earbuds touch panel to clear Bluetooth pairing record. The
earbuds LED indicator lights will flash orange and green lights on for 1s.
ANC_DCUTEC
19